Listening To The Other External Components - JVC KD-R400 Manual De Instrucciones

To stop play and detach the USB device
Straightly pull it out from the unit.
• Press SRC to listen to another playback source.
You can operate the USB device in the same way you
operate the files on a disc. (See pages 9 and 10.)
Cautions:
• Avoid using the USB device if it might hinder your
safety driving.
• Do not pull out and attach the USB device repeatedly
while "READING" is shown on the display.
• Do not start the car engine if a USB device is
connected.

Listening to the other external components

You can connect an external component to AUX (auxiliary) input jack on the control panel.
Preparation: Make sure "AUX ON" is selected in the "SRC SELECT"
1
2
—
3
4
—
Connecting an external component to the AUX input jack
Select "AUX IN."
Turn on the connected component and start playing the source.
Adjust the volume.
Adjust the sound as you want (see pages 12 and 13).
3.5 mm (3/16") stereo mini plug
(not supplied)
OPERATIONS & EXTERNAL DEVICES
• This unit may not be able to play the files depending
on the type of USB device.
• Operation and power supply may not work as
intended for some USB devices.
• You cannot connect a computer to the USB input
terminal of the unit.
• Make sure all important data has been backed up to
avoid losing the data.
• Do not leave a USB device in the car, expose to direct
sunlight, or high temperature to avoid deformation
or cause damages to the device.
• Some USB devices may not work immediately after
you turn on the power.
• For more details about USB operations, see pages 19
and 20.
=
"AUX IN" setting, see page 16.
Portable audio player, etc.
11