Ironing Without Steam; After Ironing - Philips Comfort LongLife Serie Instrucciones De Uso

ENGLISH
3
3 Put the mains plug in an earthed wall socket.
4 When the temperature light has gone out, wait a while before you start ironing
(fig. 4).
The temperature light will go on from time to time during ironing.
Using the appliance
.
Steam ironing
1 Make sure that there is enough water in the water tank.
2 Select the recommended ironing temperature (see chapter 'Preparing for use',
section 'Setting the temperature').
3 After the temperature light has gone out, set the steam control to the
appropriate steam position. Make sure that the steam setting you select is
suitable for the ironing temperature selected: (fig. 5).
- q for moderate steam (temperature settings 2 to MAX)
- w for maximum steam (temperature settings 3 to MAX)
The iron will start steaming as soon as the set temperature has been
B
reached.

Ironing without steam

1 Set the steam control to position O (= no steam).
2 Select the recommended ironing temperature (see chapter 'Preparing for use',
section 'Setting the temperature').
Features
.
Spray function
You can use the spray function to remove stubborn creases at any temperature.
1 Make sure that there is enough water in the water tank.
2 Press the spray button several times to moisten the article to be ironed (fig. 6).
Extra steam (GC1630/GC1620)
This function provides extra steam to remove very stubborn creases.
The extra-steam function only works at temperature settings between 3
and MAX.
Set the steam control to position w (= maximum steam) (fig. 7).
1
2 Press and hold the steam control for a maximum of 5 seconds (fig. 8).
3 Release the steam control and wait at least 1 minute before using this function
again to prevent water from dripping out of the soleplate.
Electronic safety shut-off function (GC1630 only)
The electronic safety shut-off function automatically switches off the iron if it has not
been moved for a while.
The auto-off light starts blinking to indicate that the iron has been switched off
by the safety shut-off function (fig. 9).
- In horizontal position, this will happen after 30 seconds.
- In vertical position, this will happen after 8 minutes.
To let the iron heat up again:
- Pick up the iron or move it slightly.
- The auto-off light goes out and the temperature light goes on.
- When the temperature light has gone out and goes on again, the iron is ready for
use.
Cleaning and maintenance

After ironing

1 Remove the mains plug from the wall socket and let the iron cool down.
2 Wipe scale and any other deposits off the soleplate with a damp cloth and a
non-abrasive (liquid) cleaning agent.
To keep the soleplate smooth, you should avoid hard contact with metal objects.
Never use a scouring pad, vinegar or other chemicals to clean the soleplate.
3 Clean the upper part of the iron with a damp cloth.
4 Regularly rinse the water tank with water. Empty the water tank after cleaning.
Double-Active Calc System
he anti-calc tablet prevents scale from clogging the steam vents
1 T
(fig. 10).
The anti-calc tablet is constantly active and does not need replacement.
2 The Calc-Clean function removes the scale particles (fig. 11).
.
4239 000 59831
3/13