Ironing Without Steam - Philips Elance 3100 Manual De Instrucciones

ENGLISH
6
C
3 Select the appropriate steam setting. Make sure that the steam
setting you select is suitable for the ironing temperature
selected:
- 1 - 2 for moderate steam (temperature settings 2 to 3)
- 3 - 4 for maximum steam (temperature settings 3 to MAX)
The iron will start steaming as soon as the set temperature has been
B
reached.

Ironing without steam

1 Set the steam control to position 0 (= no steam).
2 Select the recommended ironing temperature (see chapter
'Preparing for use', section 'Setting the temperature').
Features
Spray function
You can use the spray function to remove stubborn creases at any
temperature.
1 Make sure that there is enough water in the water tank.
C
2 Press the spray button several times to moisten the article to
be ironed.
Shot of steam
A powerful 'shot of steam' helps remove stubborn creases.
The shot-of-steam function can only be used at temperature settings
between 2 and MAX.
C
1 Press and release the shot-of-steam button.
Vertical shot of steam
Types GC3135, GC3130, GC3126, GC3125, GC3120, GC3121,
B
GC3117, GC3116, GC3115, GC3111, GC3110.
C
1 The shot-of-steam function can also be used when you hold
the iron in vertical position.
This is useful for removing creases from hanging clothes, curtains etc.
Never direct the steam towards people.