Operation; Before Operating - Denon AVR-1603 Instrucciones De Operación

Punch Through
• "Punch Through" is a function allowing you to operate the PLAY, STOP, MANUAL SEARCH and AUTO
SEARCH buttons on the CD, TAPE, CDR/MD, DVD/VDP or VCR components when in the DBS/CABLE or TV
mode. By default, nothing is set.
1 Set mode switch 1 to "VIDEO".
2 Set mode switch 2 to the component to be
registered (DBS/CABLE or TV).
3 Press the DVD/VDP power button and the TV
power button at the same time.
• Indicator flash.
4 Input the number of the
1 2 3
component you want to set.
4 5 6
(See Table 1)
7 8 9
0
Table 1
No.
CD 1
TAPE 2
CDR/MD 3
DVD/VDP 4
VCR 5
No setting 0

12 OPERATION

Before operating

3 3
4
1
2
1 2
1
2
Preparations:
Check that all connections are proper.
1
Turn on the power.
Press the power operation switch (button).
(Main unit) (Remote control unit)
• ¢ ON/STANDBY
The power turns on and power indicator is lit.
Several seconds are required from the time
the power operation switch is set to the "¢
ON/STANDBY" position until sound is output.
This is due to the built-in muting circuit that
prevents noise when the power switch is turned
on and off.
Set the power operation switch to this position
to turn the power on and off from the included
remote control unit.
• £ OFF
The power turns off and power indicator is off.
In this position, the power cannot be turned on
and off from the remote control unit.
2 Select the front speakers.
Press the SPEAKER A or B button turn the speaker
on.
(Main unit) (Remote cont ol unit)
• The front speaker A, B setting can be also be
changed with the SPEAKER button on the
remote control unit.
ENGLISH
15