Publicidad
Idiomas disponibles
Idiomas disponibles
BCT 3850
fuels must not be used with this appliance.
8. Do not store the unit in open air.
9. The unit could emit a light smell and smoke
on its first use.
10. RISK OF BURNING! Exercise caution while
handling hot oils or greases. Watch out for oil
sprays and vapors.
11. See that the unit does not shift during the
grilling session.
ATTENTION: do not cover the appliance
when it is operating to avoid the risk of fires.
ATTENTION: This symbol show: Hot
surface. The temperature of the door or the
outer surface may be high when the appliance
is operating.
BEFORE FIRST USE
1. Remove all packing material.
2. Clean the unit as described under Cleaning and care.
3. The grill must first be assembled before using it.
OPERATION
1. Insert the control unit with heating element and power cord with power plug into
the unit housing, such that the two rods are in the holes and the control unit rests
on the unit housing. Ensure that the mains cable is not clamped below the control
unit.
2. Set the tray on the unit housing, and then insert the grill stack. CAUTION! The grill
grating must not touch the heating element under any circumstances.
3. Fill the grill tray with 1.4 to 2.9 liters of water.
4. Connect the mains plug to a suitable socket. only the appropriate connector must
12
Publicidad
