Tabla de contenido
Publicidad
20
English
5. For safe operation
sharpening and maintaining the chain.
6. Use only the replacement bar and chain or
equivalent as specified by the manufacturer.
WARNING
• Make sure the chain and sprocket are correctly
adjusted before operating the pruner (see page
24, 26 for adjustment procedures). Never attempt
chain adjustment with the engine running!
• Always make sure the cutting attachment is
properly installed and firmly tightened before
operation.
• Never use a cracked or warped guide bar:
replace it with a serviceable one and make sure
it fits properly.
• If a saw blade should bind fast in a cut, shut off
the engine immediately. Push the branch or tree
to ease the bind and free the blade.
• Do not operate the pole pruner with the muffler
removed.
• When cutting a limb that is under tension, be
alert for springback so that you will not be struck
by the moving limb.
• Always stop the engine immediately and check
for damage if you strike a foreign object or if the
machine becomes tangled. Do not operate with
broken or damaged equipment.
IMPORTANT
• Do not make unauthorized modifications or
substitutions to the guide bar or chain.
• Never allow the engine to run at high RPM without a
load. Doing so could damage the engine.
• Keep the pruner as clean as possible. Keep it free of
loose vegetation, mud, etc.
Publicidad
Tabla de contenido
