Clatronic AT 3260 Instrucciones De Servicio página 55

What you should keep in mind before a test
• Alcohol remains in the mouth for some while and must be degraded first.
• After your last alcoholic drink you have to wait for 20 minutes before
measuring.
• Do not smoke and eat 20 minutes before measuring.
• Also do not take any cough candy or peppermint drops which could distort
results.
• You can repeat the test to prove the result. But wait three minutes before
taking the next measurement.
• Do not use volatile substances like paints, solvents, pesticides etc.
Warm-up
• Press the POWER key once. A signal beeps.
• The symbol "WARM UP" appears and a countdown fro 10 to 0 starts. The
alcohol tester is in warm up state.
Inserting of batteries
• Remove the battery cover on the backside of
the device.
• For the alcohol tester, Insert 2 AAA ● UM-4
● R03 batteries.
• Mind polarity! Instructions you can see on the
device.
• The 1.5 V button cell for the clock has already
been installed.
• It has been secured by a foil.
• Remove the foil (A) to activate the 1.5V button
cell.
Handling
55