Clatronic AT 3260 Instrucciones De Servicio página 58

Alarm Time
1. Press the MODE key repeatedly to access the alarm mode.
2. Press and hold the SET key for 2 seconds. The hour digits will fl ash.
3. Press the ADJ key to set the hours.
4. Press the SET key. The minute digits will fl ash.
5. Press the ADJ key to set the minutes.
6. Finally press the SET key to confi rm the settings.
7. Press the ADJ key to switch the alarm on or off. If the alarm is on the
symbol will be shown.
Temperature
1. Press the MODE key repeatedly to access the temperature mode.
2. Press the ADJ key to select the Fahrenheit or Celsius display.
Countdown
1. Press the MODE key repeatedly to access the Countdown mode.
2. Press and hold the SET key for 2 seconds. The hour digits will fl ash.
3. Press the ADJ key to set the hours.
4. Press the SET key. The minute digits will fl ash.
5. Press the ADJ key to set the minutes.
6. Then press the SET key to confi rm the settings.
7. Press the ADJ key to start the countdown or to stop it. When the count
down fi nishes an alarm will go off.
Resetting the Clock / Changing Batteries
58
• If you want to reset to factory settings
press the RESET button on the backside of
the device with a thin sharp object.
• Replace the LR44 button cell when the
clock display weakens.