Display Modes; Support - Samsung 430 Serie Manual De Uso

Display Modes
If the signal from the system equals the standard signal mode, the screen is adjusted automatically. If the signal from the system
doesn't equal the standard signal mode, adjust the mode by referring to your videocard user guide; otherwise there may be no video.
For the display modes listed below, the screen image has been optimized during manufacturing.
HDMI/DVI Input
Hor zonta Vert ca pixe! C!ock Sync Polarity PN428438P2B PN50B43dP2n
Mode Resoluton Frequency (kHz) Frequency (Hz) Frequency (MHz) (H/V} " -: ": -- -"'- "" -"
640x350 31.469 70.086 25.175 +/ - ,/ ,/
18M .........................................................................................................................................................................................................................
720x400 31.469 70.087 28.322 - / + v" v"
640x480 35.000 66.667 30.240 -/ - v" v"
MAC .........................................................................................................................................................................................................................
832x624 49.726 74.551 57.284 -/- ,/ ,/
31.469 59.940 25.175 - / - V" V"
640x480 37.861 72.809 31.500 -/ - ,/ ,/
37.500 75.000 31.500 -/ - v" v"
37.879 60.317 40.000 +/ + v" v"
800x600 48.077 72.188 50.000 +/ + v" v"
VESA DMT
46.875 75.000 49.500 +/ + v" v"
48.363 60.004 65.000 - / - ,,'/ ,,'/
1024 x 768 56.476 70.069 75.000 -/ - ,/ ,/
60.023 75.029 78.750 +/ + v" v"
1360 x 768 47.712 60.015 85.500 +/ + ,/
720 x 576 35.910 59.950 32.750 -/+ v" v"
VESACVT 44.772 59.855 74.500 - / + v"
1280 x 720
56.456 74.777 95.750 - / + v"
VESAGTF 1280 x 720 52.500 70.000 89.040 - / + v"
When using an HDMI/DVI cable connection, you must use the HDMI IN 2(DVI) terminal.
Suppo
[3 Self Diagnosis
Picture Test
If you think you have a picture problem, perform the picture test. Check the color pattern on the screen to see if the problem still
exists.
@ Does the problem stitl exist with this test photo? appears on the screen.
If the test pattern does not appear or there is noise in the test pattern, select Yes
If the test pattern is properly displayed, select No
• Yes: There may be a problem with the TV. Contact the Samsung Call center.
• No: There may be a problem with your external equipment. Please check your
connections.
If the problem still persists, refer to the external device's user manual.
Sound Test
If you think you have a sound problem, please perform the sound test. You can check the
sound by playing a built-in melody sound through the TV.
@ Does the problem stit! exist with this sound test? appears on the screen.
If during the sound test you can hear sound only from one speaker or not at all, select
Yes.
If you can hear sound from the speakers, select No.
• Yes: There may be a problem with the TV. Contact the Samsung Call center.
• No: There may be a problem with your external equipment. Please check your
connections. If the problem still persists, refer to the external device's user manual.
@ If you hear no sound from the TV's speakers, before performing the sound test, make sure Speaker Select is set to TV speaker
in the Sound menu.
@ The melody will be heard during the test even if Speaker Select is set to External Speaker or the sound is muted by pressing
the _ MUTE button.
Continued...