Source List / Edit Name; Using Your Tv As A Computer (Pc) Display - Samsung 430 Serie Manual De Uso

Source List / Edit Name
C)
+++i+_
C)
+++i+_
Source List
Use to select TV or other external input sources such as DVD / Blu-Ray players / Cable
Boxes / Satellite / receivers (Set-Top Box) connected to the TV. Use to select the input
source of your choice.
TV, AV, Component1, Component2, HDMI1, HDMI2/DVI.
[_ You can choose only those external devices that are connected to the TV. In the
Source List, connected inputs will be highlighted and sorted to the top. Inputs that
are not connected will be sorted to the bottom.
@ Using the Color buttons on the remote with the Source list
• Red (Refresh): Refreshes the connected external devices.
Press this if your Source is on and connected, but does not appear in the list.
• _-_TOOLS (Tools): Displays the Edit Name and Information menus.
/_ +) Press the SOURCE button on the remote control to view an external signal source.
Edit Name
Youcan namethe deviceconnected to the inputjacksto makeyour inputsource
selectioneasier.
VCR / DVD / Cable 8TB / Satellite 8TB / PVR STB / AV Receiver / Game /
Camcorder / PC / DVl PC / DVl / TV / iPTV / Blu-ray / HD DVD / DMA
@ When a PC with a resolution of 640x480@60Hz is connected to the HDMI IN 2(DVI)
port, you should set the HDMI2/DVI mode to PC in the Edit Name menu.
I PC Display
Using Your TV as a Computer (PC) Display
+++i+_
1,
2.
3,
4.
Setting Up Your PC Software (Based on Windows XP)
The Windows display-settings for a typical computer are shown below. The actual screens on
your PC will probably be different, depending upon your particular version of Windows and your
particular video card. However, even if your actual screens look different, the same basic set-up
information will apply in almost all cases.
(If not, contact your computer manufacturer or Samsung Dealer.)
First, click on Control Panel on the Windows start menu.
When the control panel window appears, click on Appearance and Themes and a display
dialog-box will appear.
When the control panel window appears, click on Display and a display dialog-box will appear.
Navigate to the Settings tab on the display dialog-box. The correct size setting (resolution)
Optimum: PN42B430P2D : I024x768 pixels, PNS08430P2D : 1360x768 pixels
If a verticalfrequency option exists on your display settings dialog box, the correct value is 60 or
60 Hz. Otherwise, just click OK and exit the dialog box.
................ iii
Continued...