Using The Tuner; Connect The Fm Antenna; Listening To The Fm Radio; Memorizing Stations - Pioneer XW-NAS5 Manual De Instrucciones

Using the tuner

Chapter 6:
Using the tuner

Connect the FM antenna

Connect
the FM antenna plug onto the center pin
of the FM antenna socket.
AC IN ANTENNA
FM UNBAL 75

Listening to the FM radio

The tuner can receive FM broadcasts, and lets
you memorize your favorite stations so you
don't have to manually tune in every time you
want to listen.
STANDBY/ON
PRESET
WAKE
SLEEP
UP
CLOCK SETUP
1 Press INPUT to switch to the tuner.
The tuner indicator will light, and the tuned
frequency will be displayed.
2 Tune to a station.
There are three ways to do this:
Note
1 To ensure optimum reception, make sure the FM antenna is fully extended and not coiled or hanging at the rear of the unit.
2 When a new broadcast frequency is stored in a station containing a previously stored frequency, the previous frequency will
be overwritten with the new one.
1
FM wire antenna
INPUT
PRESET
ENTER
TUNE
BASS/
TREBLE
TUNE
TUNER
PRESET
Automatic tuning – To search for
stations, press and hold TUNE +/– for
about a second. The receiver will start
searching for the next station, stopping
when it has found one. Repeat to search
for other stations.
Manual tuning – To change the frequency
one step at a time, press TUNE +/–.
High speed tuning – Press and hold
TUNE +/– for high speed tuning. Release
the button at the frequency you want.

Memorizing stations

You can save up to 10 station presets so that
you always have easy access to your favorite
stations without having to tune in manually
2
each time.
1 Press INPUT to switch to the tuner.
2 Tune to an FM radio station.
3 Press TUNER PRESET.
4 Use TUNE +/– to select the station preset
you want (e.g., '

Listening to station presets

1 Press INPUT to switch to the tuner.
2 Use PRESET +/– to select a station preset.
') then press ENTER.
06
17
En