TECHNICAL DATA
Product name
Model
Rated voltage [V]/Frequency [Hz]
Rated power [W]
Temperature range
SCOPE OF THE APPLICATION
The Egg Boiler is designed for cooking eggs.
The user is liable for any damage resulting from non-intended use of the device!
BEFORE FIRST USE
Upon receipt of the goods, check the packaging for integrity and open it. If the packaging is damaged, please
contact your transport company and distributor within 3 days, and document the damages as detailed as
possible. Do not turn the package upside down! When transporting the package, please ensure that it is kept
horizontal and stable.
DISPOSING OF PACKAGING
Please keep all packaging materials (cardboard, plastic tapes and Styrofoam), so that in case of a problem, the
device can be sent back to the service centre in accurate condition.
INSTALLING THE APPLIANCE
APPLIANCE LOCATION
The temperature of environment must not be higher than 45°C and the relative humidity should be less
than 85%. Ensure good ventilation in the room in which the device is used. The distance from any wall of the
device should be not less than 10 cm. Operate the device on flat, stable, clean, refractory and dry surfaces
out of the reach of children and people with mental disabilities. Install the device making sure that constant
access to the main plug is ensured. The power cord connected to the appliance must be properly grounded
and correspond to the technical details. Before first use, remove all elements and clean them along with the
entire device.
PRINCIPLE OF OPERATION
Before first use, assemble the device in accordance with the illustrations.
USAGE
Before you switch the device on, make sure the thermostat is set to „0".
Before use fill the food container wells with water. Water may evaporate whilst cooking.
8
Egg Boiler
RCEB 6T
230~/50
2600
50°C - 110°C
Rev. 09.06.2017
Monitor the water level at all times and make sure the heating elements remain submerged. Use the
thermostat to select the desired temperature. The orange heating on indicator light will come on and once
the pre-set temperature has been reached the indicator light switches off. Gently mount the egg holders on
the device walls. When the temperature drops, the device will automatically activate the heating process until
the pre-set temperature is reached once again. When not in use set the thermostat to „0" and remove the
power cable from the socket. Wash and dry the device once it has cooled down.
TRANSPORTATION AND STORAGE
Shaking, crashing and turning upside down of the device should be prevented when transporting it. Store it
in a properly ventilated location with dry air and without any corrosive gas.
CLEANING AND MAINTENANCE
•
Disconnect from electricity when cleaning equipment.
•
Use cleaner without corrosive substances to clean surface.
•
Dry all parts well after cleaning before the device is used again.
•
Store the unit in a dry, cool location, free from moisture and direct exposure to sunlight.
REGULAR CONTROL OF THE DEVICE
Regularly control whether the device is damaged. If it should be damaged, please stop using it immediately
and contact your customer service to solve the problem.
What to do in case of a problem?
Please contact your customer service and prepare the following information:
•
Invoice number and serial number (the latter is to be found on the technical plate on the device).
•
If relevant, a picture of the damaged, broken or defective part.
•
It will be easier for your customer service clerk to determine the source of the problem if you give a
detailed and precise description of the matter. Avoid ambiguous formulations like "the device does not
heat", which may mean either that it does not heat enough or that it does not heat at all. The more
detailed your information, the better the customer service will be able to solve your problem rapidly
and efficiently!
CAUTION: Never open the device without the authorization of your customer service. This can lead to
a loss of warranty!
Rev. 09.06.2017
9