Error Displays - Clarion DXZ435 Manual De Instrucciones

10. ERROR DISPLAYS

If an error occurs, one of the following displays is displayed.
Take the measures described below to eliminate the problem.
Error Display
ERROR 2 A CD is caught inside the CD deck and is
not ejected.
ERROR 3 A CD cannot be played due to scratches,
etc.
ERROR 6 A CD is loaded upside-down inside the CD
deck and does not play.
ERROR 2 A CD inside the CD changer is not loaded.
ERROR 3 A CD inside the CD changer cannot be
played due to scratches, etc.
ERROR 6 A CD inside the CD changer cannot be
played because it is loaded upside-down.
ERROR H Displayed when the temperature in the MD
changer is too high and playback has been
stopped automatically.
An MD inside the MD changer is not loaded.
ERROR 2
ERROR 3 An MD inside the MD changer cannot be
played due to scratches, etc.
ERROR 6 An MD inside the MD changer cannot be
played because it is loaded upside-down.
Displayed when a non-recorded MD is
loaded in the MD changer.
ERROR 2 A DISC inside the DVD changer cannot be
played.
ERROR 3 A DISC cannot be played due to scratches,
etc.
ERROR 6 A DISC inside the DVD changer cannot be
played because it is loaded upside-down.
ERROR P Parental level error
ERROR R Region code error
If an error display other than the ones described above appears, press the reset button. If the problem
persists, turn off the power and consult your store of purchase.
Cause Measure
This is a failure of CD deck's mechanism and
consult your store of purchase.
Replace with a non-scratched, non-warped-
disc.
Eject the disc then reload it properly.
This is a failure of CD changer's mechanism
and consult your store of purchase.
Replace with a non-scratched, non-warped
disc.
Eject the disc then reload it properly.
Lower the surrounding temperature and wait
for a while to cool off MD changer.
This is a failure of MD changer's mechanism
and consult your store of purchase.
Replace with a non-scratched, non-warped
disc.
Eject the disc then reload it properly.
Load a pre-recorded MD in the MD changer.
This is a failure of DVD mechanism and
consult your store of purchase.
Retry or replace with a non-scratched, non-
warped-disc.
Eject the disc then reload it properly
Set the correct Parental level.
Eject the disc and replace correct region
code disc.
25
DXZ435