Outdoor Sensor; Getting Started; Back Up Power - König Electronic KN-WS510 Manual De Uso

1. Weather forecast, moon phase reading, Comfort Level.
2. Time display (12/24H optional).
3. Date display, display range: January 1, 2011 to December 31, 2099.
4. Dual-alarm clock, the week and snooze alarm setting selected.
5. Indoor humidity.
6. Outdoor temperature display, and trends for the Max/Min recorded.
7. 433MHZ Wireless frequency to receive 3 channels of outdoor temperature.
8. Indoor temperature display, and trends for the Max/Min recorded.
9. Radio (PLL radio, FM frequency display).

Outdoor sensor

1. LCD display
2. Hole for wall mounting
3. Battery compartment
4. Iron holder

GETTING STARTED

BACK UP POWER

The 3 X1.5V AAA batteries can act as a backup power supply for the main unit.
1. Remove the battery casing.
2. Insert the batteries, matching the polarities.
3. Press RESET after each battery change
NOTE: Do not use rechargeable batteries. We recommend that you use alkaline batteries with this
product for longer usage and lithium batteries in temperatures below freezing.
AC/DC adapter
The adapter powers the unit. Plug the adapter into a socket, making sure the adapter is not obstructed
and is easily accessible by the unit.
To completely disconnect from the power, the adapter should be disconnected from the main unit.
NOTE: The main unit and adapter should not be exposed to wet conditions. No objects filled with liquid,
such as vases, should be placed on the main unit or adapter.
Set outdoor sensor
1. Remove the screws from the battery casing.
2. Insert the 3 AAA batteries, matching the polarity (+/-)
3. Select a channel: CH1/CH2/CH3
4. Replace the battery casing and secure the screws.
5. Select the temperature, units: °C/°F;
6. Place the outdoor sensor less than 20m from the main unit, and the sensor should be positioned in
an open area away from trees or other obstructions.
3