Scope Of Delivery; Accessories; Intended Use; Technical Description - Dometic SMP301-01 Instrucciones De Montaje Y De Uso

SMP301
3

Scope of delivery

• Switching power supply
• Battery charger (only SMP301-07)
• Installation and operating manual
4

Accessories

Available as accessories (not included in the scope of delivery):
Description
Overvoltage protection
5

Intended use

The type SMP301-01/-02/-03/-04/-05/-07/-10 switching power supply is suitable
for installation in habitable recreational vehicles (e.g. mobile homes, camper vans,
boats etc.). The switching power supply is used as the voltage supply for the DC con-
sumer units and can be supplied with AC or DC.
The battery charger of the SMP301-07 switching power supply is suitable for charg-
ing 6-cell lead batteries (lead-acid, gel, AGM) with a capacity of 50 Ah to 300 Ah. Do
not use the battery charger for any other purpose and do not use it to charge other
types of batteries.
The switching power supply is approved for permanent operation.
6

Technical description

The switching power supply converts an unstabilized input voltage to a stabilized
output voltage. It provides a constant DC voltage of 12.7 V for DC consumer units.
For power supply, a battery can be connected to the switching power supply via the
battery input (chapter "Connecting the switching power supply" on page 19).
The integrated priority circuit automatically switches over from battery operation to
mains operation when an external power supply is available. The battery is automat-
ically disconnected from the consumer unit.
Battery operation is activated automatically if mains operation is deactivated. The
consumer units connected are supplied with energy via the battery.
EN
Ref. number
9106505815
Scope of delivery
13