1. Safe Caution
NOTICE: To prevent fire and electric shock, do not expose this receiver
to rain or moisture. In order to avoid any possible risk of electric shock,
never attempt to open the unit. In case of the unit breaking down, re-
pair of the unit should be carried out by qualified technicians. No part
of this unit should be repaired by users.
WARNING!
> Presence of live parts inside the unit! Do not open. Risk of electric shock! No part
should be repaired by users.
> The maintenance of the receiver should be carried out exclusively by qualified per-
sons.
> If the power cord is damaged, it must be replaced or repaired by the manufacturer,
its after-sales service, qualified electrician or persons of similar qualification in order
to avoid possible danger.
> The product must be installed in accordance with national regulations.
> The used batteries must be disposed of safely. Throw them in appropriate rubbish
bins in order to protect the environment.
Proper Installation
> Place the receiver on a flat, firm and stable surface. Do not put it on a carpet or rug.
> Do not place the receiver on top of another device, such as an amplifier. This may
lead to overheating.
> Do not put anything above the unit (for example, CDs or magazines).
Sufficient Ventilation
> Place the receiver in a well-ventilated location to prevent accumulation of internal
heat. Allow a gap of at least 10cm to the rear and the top of the unit, as well as a space
of 5cm to both sides to avoid overheating.
> Do not obstruct any ventilation openings with items such as newspapers, table-
cloths, curtains, etc.
Protecting the Receiver from High Temperatures, Humidity, Water and Dust
> The receiver should not be exposed to dripping water or splashing.
> No objects filled with liquids, such as vases, shall be placed on the unit.
> Do not place any objects that might damage your unit near it (e.g. liquid filled objects
or candles).
> Do not place any source of flames such as lit candles on the receiver.
Electricity Supply
> Please unplug the receiver in case of prolonged non-use.
> If the power cord is damaged, it must be replaced or repaired by the manufacturer,
its after-sales service, qualified electrician or similar qualifications to those to avoid
possible danger.
> The plug must remain readily accessible after the installation of the product.
32