Hardware Installation - Engel ENGELDROID TDT2 4K EN1020K Manual De Usuario

2.4 Hardware installation

As shown, connect the interfaces on the television with the corresponding interfaces
on the product (such as connect the product with TV sets through the HDMI cable),
then after the power is connected, turn on the switch and you can use the product.
Antenna cable
(not included)
NOTICE: The pictures are for references only; please make the object as the standard.
34
HDMI cable
(not included)
AV cable
(not included)
WiFi router or
Ethernet cable
(optional)
Power supply