Connection Of The Devices; Operation; Danger Of Fire - EuroLite LED Controller CSM Manual Del Usuario

Connection of the devices

OPERATION

When installing the device, make sure there is no highly-inflammable
material (decoration articles, etc.) within a distance of min. 0.5 m.
Connect the connection-cable ends with the respective sockets of the LED panels and the controller.
Connect the panels to the mains with the power-plug. With the POWER-switch, you can switch the panels on
and off.
Connect the controller to the mains with the power unit. You can select the programs by pressing the buttons
on the controller.
After you connected the effect to the mains, the EUROLITE LED Controller CSM starts running.

DANGER OF FIRE!

Attention: The controller can be used with up to 1000 panels.
17/39 51930750_V_1_1.DOC