Owner's Record - Sony IPELA SNT-V704 Manual De Instalación

Ocultar thumbs Ver también para IPELA SNT-V704:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Owner's Record

The model and serial numbers are located on
the bottom. Record these numbers in the
spaces provided below.
Refer to these numbers whenever you call
upon your Sony dealer regarding this
product.
Model No. SNT-V704
Serial No.
WARNING
To reduce the risk of fire or electric
shock, do not expose this apparatus
to rain or moisture.
To avoid electrical shock, do not
open the cabinet. Refer servicing to
qualified personnel only.
This symbol is intended to alert
the user to the presence of
important operating and
maintenance (servicing)
instructions in the literature
accompanying the appliance.
AC power adaptor
Model No.: MPA-AC1 (SONY)
CAUTION:This unit is for use only with the
supplied AC power adaptor. Use
with other AC power adaptors
may cause hazards such as a fire.
WARNING
This unit has no power switch. Disconnect
device of this unit is the mains plug of the
AC adaptor.
The mains plug on this equipment must be
used to disconnect mains power. Please
ensure that the socket outlet is installed near
the equipment and shall be easily accessible.
In the event of abnormal operations,
disconnect the mains plug.
CAUTION
This installation should be made by a
qualified service person and should conform
to all local codes.
IMPORTANT
The nameplate is located on the bottom.
ATTENTION
The electromagnetic fields at the specific
frequencies may influence the picture of this
unit.
CAUTION for LAN port
For safety reason, do not connect the LAN
port to any network devices that might have
excessive voltage.
For the customers in the USA
WARNING
This device complies with Part 15 of the
FCC Rules.
Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device
must accept any interference received,
including interference that may cause
undesired operation.
This equipment has been tested and found to
comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference when the equipment is operated
in a commercial environment. This
equipment generates, uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the instruction
manual, may cause harmful interference to
radio communications. Operation of this
equipment in a residential area is likely to
cause harmful interference in which case the
user will be required to correct the
interference at his own expense.
You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate
this equipment.
The shielded interface cable recommended
in this manual must be used with this
equipment in order to comply with the limits
for a computing device pursuant to Subpart
B of Part 15 of FCC Rules.
GB
1
GB

Publicidad

Tabla de contenido
loading

Tabla de contenido