Playing A Disc; Pause; Stop Playback; Skip - Clatronic DVD 619 HC Instrucciones De Servicio

The prerequisite for playing a CD is the successful con-
nection of the devices.
1. Press the Standby/On button on the unit or on the
remote control.
2. Select DVD with the Function button.
3. Press the OPEN / CLOSE button. The disc tray opens.
4. Place the disc on the disc tray with the label side up.
Press the OPEN / CLOSE button. The disc tray closes.
5. The CD is being loaded and the display will indica-
te this accordingly. The unit will automatically start
playing as soon as loading has been completed. If not,
press the Play button.
Pause function
To briefl y interrupt playback press the Pause II button.
Pause will appear on the display. To resume playback,
press the Play button.
Stopping playback
Press the Stop button when you want to interrupt play-
back. If you wish to resume playback then press the Play
button. If the playback is to be ended press the Stop
button a second time.

Skip buttons

Skip to a certain title of a DVD or a CD using the Skip
buttons. Press the Rev Skip button once to skip to the
beginning of the previous title. Press the Forw Skip button
to skip to the next title. For Audio CDs use the number
buttons on the remote control to go directly to a chosen
track.

Fast Forward/Fast Reverse

Press the FFWD or REV
The disc will be forwarded or reversed at double speed.
There are four speed levels to choose from. Every time
the FFWD or REV
changed accordingly: 2x, 4x. 8c. and 20x. Once you have
reached the desired section, press the Play
Notes:
Forwarding or reversing to the desired section can also be
performed by holding the FFWD or REW buttons.

Slow motion

Again, choose between two speeds. The speeds are
changed as follows every time one of the Slow buttons
is pressed: 1/2 - 1/4. To return to normal playback press
Play .
96
5....-05-DVD 619_GB 96

PLAYING A DISC

button during playback.
button is pressed the speed is
button.
Skip button
While in playback press one of the Skip buttons to skip to
the previous or next title or chapter. The display will indica-
te this accordingly. Playback will start automatically.
Zoom in
To zoom in on an image press ZOOM during playback.
Use the cursors to target a particular excerpt. To return to
regular playback press Zoom until OFF is displayed.

Multi angle

Some DVDs contain scenes which have been shot from
a number of different angles. For these discs, the same
scenecan be viewed from each of these different angles.
1. While you are playing a DVD with different angles
recorded, press the ANGLE button to view the number
of the current angle.
2. Press the ANGLE button repeatedly to change the
scene to the next angle in those recorded. About
two seconds later, playback continues from the new
angle you selected. If no button is pressed within 10
seconds, playback continues without changing the
current angle.
This function can only be used for discs on which scenes
shot from multiple angles have been recorded. If only one
angle is recorded, " 1/1 " is displayed.

Audio

On some discs, the sound is recorded in two or more
formats. Follow the directions below to select the type of
playback.
1. While a disc is playing, press the AUDIO button to
show the current audio format number, e.g. 1/3.
2. Press the AUDIO button repeatedly to select the desi-
red audio format. About two seconds later, playback
continues in the new audio format.
If only one audio format is recorded, the number does not
change. About two seconds later, playback continues in
the new audio format.
24.05.2004, 14:41:28 Uhr