Designated Use - Proficook PC-UM 1006 Instrucciones De Servicio

Ocultar thumbs Ver también para PC-UM 1006:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 28
WARNING:
• Before replacing accessory parts, wait until the knife has stopped.
• Always check that the accessories are seated solidly and securely
before switching the device on.
• CAUTION: Ensure that the blender is switched off before removing
it from the stand.
• Always disconnect the appliance from the supply if it is left unat-
tended and before assembling, disassembling or cleaning.
• Do not repair the device by yourself. Please contact authorized
personnel. In order to avoid hazards, a damaged mains cable must
be replaced with an equivalent cable by the manufacturer, our cus-
tomer service or any other qualified specialist.
• This appliance shall not be used by children.
• Keep the appliance and its cord out of reach of children.
• Children shall not play with the appliance.
• Appliances can be used by persons with reduced physical, sensory
or mental capabilities or lack of experience and knowledge if they
have been given supervision or instruction concerning use of the
appliance in a safe way and if they understand the hazards in-
volved.
• This device must not be immersed in water for cleaning. Please fol-
low the instructions provided in chapter "Cleaning".
• Do not operate the appliance for more than
2 minutes. Allow it to cool for around 1 minute
before using it again.
• After 10 uses in a row, let the unit to cool to
room temperature before you use it again.
• The machine should only be used under super-
vision.
• Do not manipulate any of the safety switches.
• Do not remove the lid during operation.
• Do not put your fingers into the filler opening.

Designated use

This device is used for
• Mixing of liquids
• Chopping firm foodstuffs
• Crushing ice.
Do not use for too hard foodstuffs such as nuts or
chocolate.
It is intended for the use in private households and
similar applications.
43

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido