Orbegozo RRW 600 Manual De Instrucciones página 28

RRW 600 1200 1500 2000
The position of installing two feet
Model
First foot
RRW 600
RRW 1200
RRW 1500
RRW 2000
Wall mounting:
1. Always try to install the radiator onto an external wall (cold) under a window, but never in a
ventilated area. Follow the minimum safety distances for installation.
2. The heater should be placed with a minimum distance 150mm from all objects, walls (fig 2).
The distance from the floor must be 220mm,.from the top must be 150m.
(See figure"2").
Fig.2
How to mount the heater
Always respect the minimum dimensions shown in the last picture on the next page.
1. After selecting the location to install the thermal emitter, place an upper support vertically on the
wall and mark the two holes with a spacing of 30 mm. Once done, and depending on its thermal
emitter, choose the distance D1 with respect to the previous signals (Fig 3)
Model
RRW 600
RRW 1200
RRW 1500
RRW 2000
Second foot
1 3
1 5
1 8
1 10
Mounting dimensions
(D1)
155 mm
155 mm
542.5 mm
542,5 mm
28