Overview Of The Components - AEG MRC 4111 Instrucciones De Servicio

50
• Keep the device away from vases, baths, wash basins etc. If liquid enters
the device this may cause serious damage.

Overview of the Components

Putting into function
Insert the plug into a properly installed 230 V, 50 Hz power socket.
Radio station tuning
1. Turn the band selector switch (11) to the FM or AM position, depending on
which frequency band you wish to hear.
2. Move the function switch (17) to the ON position.
3. Turn the tuning control in order to tune in to a station. The station scale
shows the frequency that has been set.
4. If reception is too weak, change the position of the dipole antenna in order
to improve the reception.
5. An aerial is integrated into the device for the reception of AM stations. The
device can be aligned to the station by changing its position.
83649-05-MRC4111_AEG.indd 50 83649-05-MRC4111_AEG.indd 50
English
1 Set minutes (MIN)
2 Hour function key (HR)
3 Function key for delayed switch-off (SLEEP)
4 Function key (SNOOZE)
5 Loudspeaker
6 Throw-out aerial (FM)
7 Mains lead
8 Alarm (AL) function button
9 Time setting function key (TIME)
10 Volume control (BUZZ. OFF
11 Band selection switch (AM/FM)
12 Regulator (TUNING)
13 Frequency display, Station scale
14 Battery compartment
15 LED display
16 LED for activated alarm function (AUTO)
17 Function switch (ON/OFF/AUTO)
UKW = FM, Medium Wave = AM.
VOL)
24.02.2009 12:23:48 Uhr 24.02.2009 12:23:48 Uhr