Overview Of The Components - AEG MRC 4105 P Instrucciones De Servicio

1 Set minutes (MIN)
2 Hour function key (HOUR)
3 Time setting function key (TIME)
4 Alarm function key (ALARM)
5 Function key for delayed switch-off
(SLEEP)
6 Wake-up interval (SNOOZE)
7 Function switch (AUTO/OFF/ON)
8 LED for activated alarm function ( )
9 Station scale
Insert the plug into a properly installed 230 V, 50 Hz power socket.
Radio station tuning
1. Turn the band selector switch (18) to the FM or AM position, depending on which
frequency band you wish to hear.
2. Push the function switch (7) to the ON position and select a station by turning the TUN.
control (10). The station scale (9) indicates the selected frequency.
3. If reception is too weak and the station being received hisses, try to improve reception
by turning, unwinding or winding up the throw-out antenna.
GB
4. An aerial is integrated into the device for the reception of AM stations. The device can
be turned to line it up with the transmitter.
Volume
The desired volume can be sent using the VOL(UME) regulator (12).
Setting of the Clock (24 h)
Hours: Press the TIME key (3) and the HOUR key (2) simultaneously.
Minutes: Press the TIME key (3) and the MIN key (1) simultaneously.
Setting of the Alarm (24 h)
Hours: Press the ALARM key (4) and the HOUR key (2) simultaneously.
Minutes: Press the ALARM key (4) and the MIN key (1) simultaneously.
54
05-MRC 4105 P AEG 54

Overview of the Components

10 TUN. regulator
11 LED display
12 „ " VOL (volume) regulator
13 Battery compartment
14 Lens
15 FOCUS regulator
16 Swiveling projector
17 PROJECTION ON/OFF switch
18 Band selection switch (FM/AM)
19 180° ROTATION regulator
Putting into function
UKW = FM, Medium Wave = AM.
28.03.2007, 8:04:20 Uhr