Tabla de contenido
Publicidad
oPeratIon
1.
Remove all packaging materials
and any transport safety devices.
Keep packaging material out of
reach of children. Danger of suf-
focation!
2.
After washing your hair, dry it tho-
roughly with a towel.
3.
Connect the plug to a wall socket.
4.
Switch the appliance on using
and select the desired blower and
heat settings. The following set-
tings may be selected:
eIn/aus (on/oFF) switch and blo-
wer:
0 = off
1 = soft air stream, ideal to style
your hair
2 = medium air stream for dry-
ing and styling
heat setting switch:
1 = lukewarm, ideal for nearly
dry hair
2 = warm, ideal to dry damp hair
3 = hot, ideal to dry wet hair
5.
The cool shot serves to stabilise
the styling and give more body.
cleanIng anD care
1.
unplug the appliance from the wall
socket.
let the appliance cool off.
2.
3.
never immerse the appliance or the
lead cable in water or other liquids
to clean them.
4.
Detach the air intake screen by
turning
it
Clean the screen from dust and
fluff using a paint brush or a
small brush. Reattach the air
intake screen by turning it clock-
wise until it latches into place. If
necessary, separate the filter from
the screen and rinse it with water.
The filter must be completely dry
before using the appliance again.
Reattach the filter to the screen
taking into account that the con-
vex side faces the screen and
counter
clockwise.
Keep the cool shot button pressed
during operation to obtain a cold
air stream.
6.
If desired, following accessories
may be used:
concentrator
The concentrator allows for drying
hair parts individually and pre-
cisely. After use the concentrator
can be simply detached from the
appliance. In order to avoid burns
it is nevertheless recommended
to wait until the appliance and
the attachments have cooled off.
7.
The attachment can be easily
detached by pulling. In order to
avoid burns it is nevertheless
recommended to wait until the
appliance and the attachment has
cooled off.
caution! the appliance is very
hot during and after operation!
reattach the screen to the hair
dryer as described above.
5.
Clean the appliance with a slightly
damp cloth.
6.
Do not use any scrubbing spon-
ges, abrasive agents, steel wool,
metal objects, disinfectants or hot
cleaning agents, since they can
damage the appliance.
7.
The concentrator can be rinsed
with water, if necessary. The
attachable accessory must be
completely dry before using it
again.
17
Publicidad
Tabla de contenido
