Assembly / Operation - Hailo ProfiStep Combi Instrucciones De Uso

6. Assembly / operation

6.1 Set-up options (schematic diagram)
A - Single ladder
B - Single ladder
C - Single ladder
D - Free-standing stepladder
E - Work platform (with 2-part metal platform)
F - Work platform (with 2-part metal platform)
6.2 Adjustment and locking mechanism
By means of the safety joint [C], the individual ladder
parts are unlocked and are locked again after the ladder
has been brought into the desired set-up position.
For adjusting one of the ladder parts, both of the
safety joints on opposite sides of the ladder have to be
activated.
1. Original position: the ladder is locked, and the stop
button [C-2] is in the 'LOCKED' position.
2. Pull up the lever [C-1], and the ladder is unlocked.
The stop button [C-2] is in the 'UNLOCKED' position.
3. The ladder part [A-1] can now be adjusted to the
desired position.
4. The ladder part [A-1] audibly clicks into place auto-
matically. The ladder is locked, and the stop button
[C-2] is again in the 'LOCKED' position.
This procedure is repeated once again to adjust the lad-
der or bring it into another set-up position.
20
6.1
6.2