Lubricating The Shearing Head; Reprocessing; Cleaning/Disinfection - Aesculap Suhl Favorita II Instrucciones De Manejo

Aesculap Suhl GmbH
Shearing machine Favorita II, Favorita Speed, Electra® II, Ehmann turbo-line®

4.3.4 Lubricating the shearing head

Disassemble the shearing head, see section Disas-
semble the shearing head.
Clean upper cutting plate 17 and lower cutting
plate 18 with a soft wipe or brush. Make certain
the gaps in serration 16 are cleaned properly.
Slightly lubricate upper cutting plate 17 and lower
cutting plate 18 with special lubricant for shearing
heads GT604.
5.

Reprocessing

Damage to, or destruction of the
product
cleaning/disinfecting or steriliza-
tion!
CAUTION
Only clean and disinfect the
product manually.
Do not sterilize the product
under any circumstances.

5.1 Cleaning/disinfection

Note
Always follow disposal and hygiene instructions and
regulations!
Cleaning/disinfection
Risk of electric shock and fire haz-
ard!
Unplug the device before clean-
DANGER ing.
Ensure that no fluids will pene-
trate the product.
Leave the product exposed to
air for at least 1 minute after
cleaning/disinfecting.
6
caused by mechanical
Damage to the product due to
incorrect cleaning or inappropriate
cleaning/disinfecting agents!
Use any commercial detergent
CAUTION
for surface cleaning.
Never immerse the product in
water or detergent.
Do not introduce any fluid into
the charging bays.
Clean the contacts in the charg-
ing bays, applying extreme care.
Wipe the shell of the product with a lint-free cloth
moistened with a commercial disinfectant for wipe
disinfection.
If necessary, after the appropriate exposure time,
wipe off any residues of the cleaning/disinfecting
agent with a lint-free cloth moistened with clean
water.
Dry the product with a clean, lint-free cloth.
Clean the contacts in the charging bay with isopro-
panol or ethyl alcohol and a cotton swab. Do not
use corrosive chemicals.
If necessary, repeat the cleaning/disinfecting pro-
cess.
Cleaning the air filter
Note
The air filter must be cleaned once a week or whenever
necessary!
Slide back and remove air filter 7.
Blow through or wash air filter 7.
Slide dry air filter 7 into its seating.