Würth 0715 53 090 Instrucciones De Uso página 3

1 GB
User's Guide Automotive Current Testers
Art. 0715 53 090 / Art. 0715 53 091
Introduction
Measuring adaptor for easy current detection and
measurement of 20 A DC current on type electric
fuses in automobiles. The measuring adaptor can
be connected to any commercially available by a
banana plug/pin plug.
Controls
Specifications
Model Fuse Type
Standard 20 A / Standard
Mini 20 A / Mini
Operating Instructions
1. Insert the Standard/Mini fuse into the adaptor
fuse jack.
2. Insert the pin plug into the fuse box jack of the
automotive.
3. Switch ON the adaptor.
4. Run the automotive and the LCD of adaptor
displays the readings.
1
2
4
3
LCD Display / Measuring Range
Resolution
• / 10 mA 20 A / 48 V DC-10 sec.
• / 10 mA 20 A / 48 V DC-10 sec.
3
International Safety Symbols
Refer to the manual for further
!
information.
1. Pin plug
2. Fuse jack
3. Connect line
4. LCD display
5. Power ON/OFF
5
Battery Replacement Models:
Power is supplied by a 12 volt battery
(Art. 0827 08 23). The "BAT" appears on the
LCD display when replacement is needed.
To replace the battery, remove the one screw from
the back of the adaptor and lift off the front case.
Remove the battery from battery contacts.
Accuracy
± (2.0% reading +2 digits)
± (2.0% reading +2 digits)