82
10. Boiler decommissioning | 11. Quick reference guide... | 12. End notes for...
10. Boiler decommissioning
Most of the boiler components are made of steel and can be disposed
of by returning to an authorised scrap yard. Other components must
be disposed of in compliance with binding regulations.
11. Quick reference guide -
Fire and safety
1.
Please read the Operation and Maintenance Manual before boiler
start-up.
2.
Do not use solvents, petrol etc. to light a fire.
3.
Do not open electrical devices during live working to avoid electric
shock.
4.
Place the required fire fighting equipment in the fuel store and
the boiler room.
5.
Prevent unauthorised access.
6.
The heating system equipment may be operated by authorised
and trained personnel only.
7.
Check the wiring system and the flue system periodically.
8.
Do not block the vents.
9.
Check the burner operation and the flue gas quality, adjust the
burner or analyse flue gas as required.
10. Disconnect the power supply (main switch) before maintenance.
11. Notify your supervisor of any faults.
12. Keep the boiler room clean and tidy.
13. The device has to be repaired by a trained and authorised
personnel or an authorised service centre only.
14. Use carbon dioxide or dry powder extinguisher only.
Experts in heating
12. End notes for installers
Connect the boiler to the hydraulic system by installing the
mixing valve with the boiler circulation pump which ensures the
return water temperature of at least 45°C.
Before connecting the boiler to the flue system, contact the
relevant authorities for approval.
The compression tank must be connected with the boiler via a
supply duct without any cut-off devices.
Mini Bio and Mini Bio Luxury User Manual - ENGV 08.15