Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
troLAb hoot
Motor does not start
Suction force is gradually
decreasing
Cord does not rewind
fully
Vacuum cleaner does not
pick up dirt
Low or decreasing
suction
Body overheating
Static electricity
discharge
• Check the cable, plug, and socket.
Let cool.
• Check for a blockage
and remove.
Pull the cord out 2-3m (6.5 - 9.75 ft.) and push the cord
rewind button.
Check the hose and replace if necessary.
• Please check
the filters and, if needed,
clean as illustrated
in the instructions.
If the filters are clogged
and cannot
be
cleaned,
replace
with new ones.
• Please check the filters. If needed, clean as illustrated in the
instructions.
• Please decrease
power
suction.
• This can also occur
when the air in the room is very dry.
Please ventilate
the room to increase
the humidity.
16
troubleshooting
Publicidad
Tabla de contenido
