König SAS-PH360 Manual De Uso página 3

1. Drill holes in the wall or other material A1/A2 to mount the outdoor unit and pass the
cable through.
2. Connect connector B1 to B2 (for electronic lock 12 V, 1 A if installed).
3. Connect connector C1 to C2.
4. Tighten the screws D1 and D2.
Note: the connectors B1/B2 and C1/C2 need to be behind the wall or other material and not
between the outdoor unit and wall or other material.
Connection of electronic lock
Lock without adapter, power supplied via outdoor unit. When the
door is closed, the circuit voltage is 0 V. By unlocking the door the
circuit voltage 12 V. Delay is 4~7 seconds.
Lock without adapter, power supplied via outdoor unit. When the
door is closed, the circuit voltage is 12 V. By unlocking the door the
circuit voltage 0 V. Delay is 4~7 seconds.
Description and operation of the outdoor unit
1. Loudspeaker
2. Camera
3. IR LED for night view
4. Call button
5. Microphone
12 V
OFF
0 V
12 V
ON
0 V
• Press the call button.
• The indoor monitor will give a
ding dong sound and activate the
monitor screen.
3
ENGLISH
Unlock
ON
OFF
Lock
Lock
ON
OFF Unlock