Setting The Control(S); Adjusting Control Settings; Ice Maker - Whirlpool 8ET8FTKXKT03 Manual De Uso

Frigorífico con congelador incorporado
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

IMPORTANT: Because air circulates between both sections, any
odors formed in one section will transfer to the other. You must
thoroughly clean both sections to eliminate odors. To prevent
odor transfer and drying out of food, wrap or cover foods tightly.

Setting the Control(s)

For your convenience, your refrigerator control(s) are preset at
the factory. When you first install your refrigerator, make sure that
the control(s) are still preset to the mid-settings as shown.
NOTE: To turn your refrigerator off, turn the refrigerator control to
the word OFF or until the word OFF appears. Your product will
not cool when the refrigerator control is set to OFF.
Mid-setting "3"
Mid-setting "3"
1
WARMER
2
REFRIGERATOR
3
RECOMMENDED SETTING
4
5
COLDER
Mid-setting "4"
REFRIGERATOR
4
IMPORTANT:
Give your refrigerator time to cool down completely before
adding food. It is best to wait 24 hours before you put food
into the refrigerator.
If you add food before the refrigerator has cooled completely,
your food may spoil. Adjusting the Refrigerator and Freezer
Controls to a higher (colder) than recommended setting will
not cool the compartments any faster.
The mid-setting(s) indicated in the previous section should be
correct for normal household usage. The controls are set
correctly when milk or juice is as cold as you like and when ice
cream is firm.
If the temperature is too warm or too cold in the refrigerator or
freezer, first check the air vents to be sure they are not blocked.
If you need to adjust temperatures, use the settings listed in the
chart below as a guide. On models with two controls, adjust the
refrigerator temperature first. Wait at least 24 hours between
adjustments and then re-check the temperatures.
1
WARMER
2
FREEZER
3
RECOMMENDED SETTING
4
5
COLDER
FREEZER
4
NOTE: Do not force the wire shut-off arm up or down.

Adjusting Control Settings

CONDITION/REASON:
REFRIGERATOR section too
warm
Door opened often, large
amount of food added or room
temperature very warm
FREEZER section too warm/ice
not made fast enough
Door opened often, or large
amount of food added or very
cold room temperature (can't
cycle often enough)
Heavy ice usage
REFRIGERATOR section
too cold
Controls not set correctly for
your conditions
FREEZER section too cold
Controls not set correctly for
your conditions

Ice Maker

(on some models - Accessory)
Turning the ice maker on/off
To turn the ice maker on, simply lower the wire shut-off arm.
NOTE: Your ice maker has an automatic shut-off. As ice is
made, the ice cubes will fill the ice storage bin and the ice
cubes will raise the wire shut-off arm to the OFF (arm up)
position.
To manually turn the ice maker off, lift the wire shut-off arm to
the OFF (arm up) position and listen for the click to make sure
the ice maker will not continue to operate.
ADJUSTMENT:
Adjust REFRIGERATOR
or TEMPERATURE
Control one setting
higher
Adjust FREEZER or
TEMPERATURE Control
one setting higher
Adjust REFRIGERATOR
or TEMPERATURE
Control one setting
lower
Adjust FREEZER or
TEMPERATURE Control
one setting lower
MAX
NORMAL
11

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

8et8mtkxkt038et8wpkxkt038et1wtkxkt028et1mtkxkt028et1wtkxkt03

Tabla de contenido