First Use; How To Use - Vega Salamandra Instrucciones De Uso

Electric salamander
6 Handling/Operation
6.1 Set-up/Assembly
"
Unpack the appliance.
"
Remove the protection film from the appliance.
Usage as heat bridge
To use the appliance as heat bridge:
"
Remove the 4 screws from the back side of the appliance.
"
Remove the back board.

6.2 First use

First cleaning
"
Clean the appliance before the first use (see Cleaning).
Connect the appliance
Life danger due to mains voltage!
"
"
Danger
"
"
When connecting the appliance to a socket without ground wire:
"
When connecting the appliance directly to the mains supply:
"
When connecting the appliance to a socket:
"
Insert the plug in the socket.
The installation of the appliance is completed.

6.3 How to use

Operating elements and advice.
!
The operating element controls the function.
Switch/Button
1/0
10
Make sure that the voltage and frequency of the mains correspond
to the values specified in the rating plate.
Connect the line cord exclusively to a socket with ground wire.
Do not use an extension cable or a multiple socket adapter to
connect the appliance.
Make sure that the line cord is not damaged.
Ask qualified personnel to install the appliance.
Ask qualified personnel to install the appliance.
To switch the appliance on and off
Function