Usb Operation; Resetting The Unit - Fenton KSM Serie Manual De Instrucciones

Caution: Do not use excessive force to tap your tablet or smartphone screen when it's placed in the Tablet/Smartphone holder.
It may result in the stand accidentally falling down and causing damage to your external device.

USB OPERATION

The system is able to playback MP3 files which are stored in the memory media with USB thumb drive.
Note: If music stored in your USB thumb drive does not conform to the MP3 standard, it may not play properly.
1. Plug-in the USB plug and make sure it is inserted completely.
Press the POWER button to turn on the unit, tap the FUNCTION button to select USB mode.
2. System unit starts to play songs stored in USB thumb drive automatically.
PLAY / PAUSE button: Press the PLAY/PAUSE button once to pause the music playback, Press it again to resume music
playback.
SKIP UP / SKIP DOWN button: During MP3 music playback, tap the button once to skip to the next track. During MP3 playback,
tap the button once to skip to the previous track.
3. Adjust the MASTER VOLUME CONTROL of the unit to obtain the desired audio sound level.
4. USB mode defaults in repeat All tracks playback, press the POWER button to turn off the unit after using.
REMARKS: If connecting the system to MP3 player via the USB port, due to variances in MP3 encoding format, some MP3
players may not be able to play via the USB port. This is not a malfunction of the system.
•
There are numerous USB thumb drive producers. Solutions and formats are variable between each other. Therefore,
we do not guarantee this unit can support all USB thumb drive from every brand.
•
USB thumb drives supported: Support FAT 32 format, 64 GB maximum.
BT OPERATION
The unit has a BT function that can receive a signal within 8 meters. Pairing the unit with a BT device to listen to music:
1. Press the POWER button to turn on the unit, tap the FUNCTION button to select BT mode.
If the unit is not paired with any BT device, the display will flash "BT ".
2.
3. Activate your BT device and select the search mode.
"KSM15" will appear on your BT device list.
4.
Select "KSM15" and enter "0000" for the password if necessary.
5.
6. To disconnect the BT function, press the FUNCTION button to switch to another mode or disconnect the function from
your BT device.
NOTE:
•
If the signal strength is weak, your BT receiver may disconnect, but it will re-enter pairing mode automatically.
•
For a better signal reception, remove the obstacles between the unit and the BT device.
•
This unit supports A2DP (Advanced Audio Distribution Profile) and AVRCP (Audio Video Remote Control Profile)
functions. This can only be paired with one BT device at one time.
•
Compatibility with all devices and media types is not guaranteed.
•
Some mobile phones with the BT function may connect and disconnect as you make and end calls. This is not an
indication of a problem with your unit.

RESETTING THE UNIT

If the system does not respond or exhibits erratic or intermittent operation, you may have experienced an electrostatic discharge
(ESD) or a power surge that triggered the internal microcontroller to shut down automatically. If this occurs, simply disconnect
the AC Adapter. Wait for at least 3 minutes and then setup the unit again as if you were using it for the very first time.
6