Appendix B: Ut6 Multipin Wiring Guide And Chart - Samson SYNTH SIX Manual Del Propietário

Appendix B: UT6 Multipin Wiring Guide and Chart

The UT6/UT6X transmitter can be used with
a wide range of lavalier microphones,
headset microphones and instruments (such
as electric guitar or bass). The illustration to
the right shows the wiring connections for
its multi-pin input connector:
Samson Technologies offers the following pre-wired input accessory cables for the UT6:
Part Number Description
GC-1
Instrument cable, suitable for use with electric guitar or bass, etc. Terminates at 1/4" phone plug.
MC-1
Low-impedance microphone cable, suitable for use with most dynamic and condenser microphones.
Terminates at standard 3-pin XLR plug.
We offer the following lavalier microphones, available pre-wired for use with the UT6: Audio-Technica 831H-7 and
MT-350; Foster ECM-40; Sennheiser MKE-2; Sony ECM-44, ECM-55, and ECM-77.
We also offer the following headsets, available pre-wired for use with the UT6: AKG C-409 horn mic; AKG C-410;
Audio-Technica ATM-75 and Pro-8HE; Countryman IsoMax; and Crown CM-311(E).
For information about connecting other lavalier microphones and headsets to the UT6, refer to the chart below.
Manufacturer Model No.
AKG C409 Horn Mic,
C410 Headset
Audio Technica AT-831, ATM-75
Audio Technica PRO8 Headset
Audio Technica MT-350
Countryman Isomax Headset
Crown CM-311(E)
Foster ECM-40
PSC PSC/P6
Sanken COS-11PT
Sennheiser MKE-2, MKE-40, 5048P
Sennheiser MKE-48
Shure SM10A
Sony ECM-44, ECM-55,
ECM-77
Sony ECM-144
High Impedance GC-1/P6
Guitar
Low Impedance MC-1/P6
Guitar
Keyboards GC-1/P6
Pin Information
NOTES:
• Resistors in plugs should be SMD (Surface Mount Device) or miniature type.
• Users of Sennheiser MKE-40: Add a 100pF capacitor between pin 2 and pin 5 only if necessary.
For more information, call Samson Technical Support at 1-800-372-6766.
SMALL DIAMETER LAVALIER WIRE
Pin 1 Pin 2
Shield White/Clear
Red (2x) Yellow (2x)
N/C Red (2x)
15KΩ Resistor White/Clear
to pin 2
Red Green
Red White
15KΩ Resistor White/Clear
to pin 2
Red White
Black White/Clear
Red Blue
Red Blue
N/C Red
Red White/Clear
15KΩ Resistor White/Clear
to pin 2
N/C N/C
N/C N/C
N/C N/C
+9 VDC Audio
60
LARGE OUTER
STRAIN RELIEF
PLUG CASE
Pin 3 Pin 4
N/C N/C
15KΩ Resistor N/C
to pin 2
N/C N/C
N/C N/C
Jumper-to-pin 2 N/C
N/C N/C
N/C N/C
N/C N/C
Jumper-to-pin 2 N/C
Jumper-to-pin 2 N/C
N/C N/C
N/C N/C
Jumper-to-pin 2 N/C
N/C N/C
N/C Audio
Jumper-to-pin 2 N/C
N/C Audio
Ground Hi-Z
Bipolar Audio
SMALL INNER
SLEEVE STRAIN RELIEF
Pin 5 Pin 6
N/C Red
N/C Shield
N/C Yellow (2x)
Shield
N/C Shield
Jumper-to-pin 6 Shield
N/C Shield
N/C Shield
N/C Shield
Jumper-to-pin 6 Shield
Jumper-to-pin 6 Shield
Shield N/C
N/C Black & Shield
N/C Shield
N/C Shield
N/C Shield
XLR-2 XLR-1 & 3
(Audio) (GND)
N/C Shield
Mic Ground
Lo-Z Unipolar