Before Use - Bourgini 21.3000.00.00 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

or disassembling it and before cleaning or
servicing the unit.
Engine driven appliances: beware of sharp
and/or moving parts. Always keep your hands
away from the moving parts when using,
cleaning or servicing the appliance.
Heating devices: wait until the appliance has
cooled down before you touch the housing and
parts of the unit.
Be extra careful during cleaning and servicing.
INTRODUCTION
This stylish blender has stainless-steel cutting
blades and a super powerful motor, so you can
chop fruit and vegetables, and purée shakes and
juices with ease. You can use one of the 6 digital
programmes or blend manually. Using the hole in
the lid, you can add extra ingredients during blending
without spillage. The rubber feet stop the blender
moving while in use. At high speeds, liquids will heat
up by the friction of the blades. This is usefull when
making e.g.soups or sauces. It also helps to improve
the mixing result. But be aware that after blending,
originally cool ingredients may have heat up.
OPERATION
The blender includes the following parts:
1.
Filling cap
2.
Jar Lid
3.
Jar
4.
LCD Display
5.
Control panel
6.
Pulse button
7.
Power button
8.
Brush
9.
Mixing Bar

BEFORE USE

Clean the appliance and its parts (see
'Maintenance and Cleaning').
Fit the jar onto the base.
Put the lid on the jar.
Position the filling cap on the lid and fix it into
place by turning it clock-wisely.
To dismantle the appliance repeat the steps above
in reverse order.
BLENDING
Cut the food into pieces that will fit easily into
the jar.
Put the pieces into the jar and put the lid
on the jar to avoid spattering.
9
Plug in the blender and click on the Power key
to turn on the machine.
Click the function you select.
Click on the Start key to run the machine.
Click the Power key to stop the machine.
Pulse key: click on this key, the machine
will work at the highest speed; Remove finger
and the machine will stop working. It suits for
soft food, seasoning steps, and cleaning jar
after use. Maximum continues working time
is 1 minute.
Power key: when the machine is working,
click on this key and it will stop. When the
machine is not working with all programs light
on, click this key, and it will power off. When
the machine is not in use for more than 2
minutes, it will be powered-off.
After the processing is completed, the buzzer
will buzz and the machine will stop working
automatically.
If you want to add extra ingredients, simply
turn the filling cap 90 degrees and remove it
from the lid. If the pieces are too large for the
hole, turn off the appliance, remove the lid and
put the pieces into the carafe. Put the lid back
on the blender before turning it on again.
Note: a blender mixes and purees. The 'blade'
is purposefully blunt so that it pulverises
ingredients. A blender does not cut and cannot
take the place of a food processor or mincer.
Programmes recipes:
1. Vegetables & Fruit
Time: 2mins
Suitable for vegetable mixture and fruit mixture
Cut vegetable or fruit into 1.5-2cm block or length
Pour cold or boiled water or milk together to jar
and blend;
Add some sugar or seasoning according to flavor;
2. Nuts milk
Time: 4mins
Use nuts, dried or fresh fruit.
Pour milk and food to jar together and blend;
Add some sugar or honey according to flavor.
Soak nuts for 8-12 hours;
Pour milk and food to jar together and blend;
Fully cooked the mixture nuts milk.
Add some sugar or honey according to flavor.
EN

Publicidad

Tabla de contenido
loading

Tabla de contenido