Maintenance And Care; Cleaning The Housing - Bodum BISTRO 11532 Instrucciones De Uso

– Immerse the mixer attachments into
the mass and choose the desired
speed setting (1). See Chapter SPEED
SETTINGS.
– To prevent splashing, make sure
that the attachments always remain
immersed in the mass while mixing.
– Upon completion of the mixing
process, turn the speed control (1) to
0 and unplug the device.
– If you do not need to use the mixer any
long, place it on the stand (6) with its
four slip-proof silicone feet.
REMOVING THE ATTACHMENTS
– Do not remove the mixer attachments
until you have turned the speed control
(1) to 0 and have unplugged the
device.
– Press the unlock button (2) to remove
the attachments. Make sure that you
hold the attachments by the shaft.
In the interest of your safety, the
attachments can be unlocked only if you
have turned the speed control (1) to 0.

MAINTENANCE AND CARE

– Before you clean the hand mixer,
unplug it.
– Do not use any harsh cleaning
substances.
CLEANING OF ATTACHMENTS
– You can remove any excess food from
the attachments with a spatula made
of rubber or plastic material.
– You can clean the attachments by
hand or in the dishwasher.
– Any repairs have to be performed by an
authorized service center.

CLEANING THE HOUSING

– Use only a moist cloth to clean any
parts of the housing of the mixer.
– Never immerse the motor housing,
mains plug and power cord into water.
Remember, the mixer Is an electrical
device.
STORAGE
– Remove the attachments every time
you are done using the hand mixer.
– While it is not in use, place the mixer
on the stand (6).
Always disconnect the hand mixer
from mains while it is not in use.
5