Basic Operations; Turning On The Power; Adjusting The Audio Volume; Displaying Monitor Setting Bars - JVC KW-NT1 Manual De Instrucciones

Basic operations

Turning on the power

Turn on the ignition switch.
• When displaying the map screen for the first time
after turning on the power, the screen below
appears. Pay sufficient attention when operating the
unit and make sure of safe driving.
– If [OK] is not pressed on the caution screen, the
same screen appears each time you switch to the
map screen. To use the map screen, press [OK].
• The power is turned off when the ignition switch is
turned off.

Adjusting the audio volume

Increase
Decrease
• About the adjustable volume range, ☞ page 68.
• To adjust the guidance volume, ☞ page 40.
Displaying monitor setting
bars
[Hold]
Night Map Changes the map to the night color.
*1
Mode • Auto: Activates the night mode when
you turn on the headlights. *
• On: Activates the night mode.
• Off: Cancels.
Adjusts the brightness. (–5 to +5)
Screen Off Turns off the screen.
• To turn on the screen, perform one of
the followings:
– Press AV MAP.
– Press and hold DISP.
– Touch the screen.
To hide the monitor setting bars, perform one of
the followings:
• Press DISP.
• Press [ ].
• Touch the area other than the monitor setting bars.
1
* Appears only when the map screen is displayed.
2
* The ILLUMINATION CONTROL lead connection is
required. (☞ Installation/Connection Manual)
11
1
*
2