JVC KW-NT1 Manual De Instrucciones página 70

AV menu items
Menu items
1
Language *
Time Format
1
DST *
(Daylight Saving Time)
1
Time Zone *
Tuner Area
Beep
Startup Message
Shutdown Message
Reverse Signal Polarity *
Restore Factory Default
1
* The setting varies depending on the installation settings (☞page 9).
For entering the characters, ☞ page 23.
2
*
Selectable settings
Select the language used for on-screen information and voice guidance.
English, Español, Français
Select either 12-hour system or 24-hour system.
12 Hours, 24 Hours
Activate this if your residential area is subject to DST.
Auto : Activates daylight saving time.
Off : Cancels.
Select your residential area from one of the following time zones for
clock adjustment.
Hawaii, Alaska, Pacific, Mountain, Central, Eastern, Atlantic,
Newfoundland
US : When using in North/Central/South America. FM/AM intervals are
set to 200 kHz/10 kHz.
EU : When using in any other areas. FM/AM intervals are set to 50 kHz
(100 kHz during auto search)/9 kHz.
SA : When using in South American countries where FM interval is
100 kHz. AM interval is set to 10 kHz.
On: Activates the key-touch tone.
Off: Cancels.
Edit the voice message at startup/shutdown of the System.
• To edit the message, press [Edit], enter the message, then press
2
[OK].* You can listen to the edited message by pressing [Test].
1
Battery, GND (☞ page 9)
Initialize all settings you have made. Press [Restore] to initialize the
settings.
• When restoring the settings, adjust the settings on installation
setting screen (☞ page 9).
70
Initial: Underlined