Acqua Brevetti PuliFIL Serie Manual De Instrucciones página 22

3) Check for the compliances of the installation with all local rules or recommendations issued by the
competent local area offices.
Verify that there are
drain connection.
In case of doubt please contact Acqua Brevetti Srl (Tel. +39.(0)49.8973432, e-mail: info@acquabrevetti.it).
B1.6 Allowed installation schemes
Warning! It is necessary to install the filter following the water flow direction indicated by the row
stamped on the brass head of the filter. In case of installation with water inlet on the right, the label with
technical data would stay behind the filter (facing the wall).
Any other arrangement may cause the non proper operation of the device. The filter discharge connection must be
canalized in a view drain.
In case of doubt contact with Acqua Brevetti Srl (Tel.: +39.(0)49.8973432 or send an e-mail to info@acquabrevetti.it).
MAN125
PULIFIL - ENGLISH
no leaks from the entrance and exit connections and from the filter
PuliFIL is supplied without assembled covers in order to give the
possibility to:
- Install the filter properly following the water flow direction
indicated by the row stamped on the brass filter head;
- Use the brass filter head to fix the filter to piping. The
hexagonal in and out brass connections offer a better grip;
- Properly assemble the front cover in the front position.
PAG.E-10