Count - Domus DTP2-11 Manual De Usuario

4.3

COUNT

With the technician's menu window open, place the cursor over COUNT, and press
SELECT to go to the COUNT menu
The count menu is shown below, the left column gives the data and the right column
gives the figures for that data.
TOTAL COUNTERS
TOTAL TIME
: The total time counter gives the time during which the dryer has been switched
on. It counts in hours.
RUN TIME
: The run time counter gives the time the dryer has been operating. This is not the
same as the number of hours the dryer has been switched on. It counts in minutes.
HEAT TIME
: The heat time counter gives the time during which the heater has been switched
on. It counts in minutes.
T.FILTER
: The T.filter counter gives the time since the filter or fluff bag was last removed for
cleaning (the counter counts the time since the filter cover was last opened). It counts in hours.
FILTER (AL-2):
The Filter counter (AL-2) gives the number of times the AL-2 Alarm, filter cover
open, has been triggered.
FLAME (AL-3):
The Flame counter (AL-3) gives the number of times the AL-3 Alarm, no flame,
has been triggered. This alarm is only triggered in gas-heated dryers.
A.FLOW (AL-4):
The A.Flow counter (AL-4) gives the number of times the AL-4 Alarm, no air
flow in extraction, has been triggered.
.
TYPE MENU
OPTION
COUNT
EDIT
EXIT
TOTAL COUNTERS
TOTAL TIME
RUN TIME
HEAT TIME
T.FILTER
FILTER (AL-2)
FLAME (AL-3)
A.FLOW (AL-4)
DRUM ALARM (AL-8)
O.HEAT (AL-6)
0004
0023
0004
0023
0004
0005
0000
0000
0000
65