Alarms And Warnings - Domus DTP2-11 Manual De Usuario

A table is then displayed with the default parameters configured for each programme.
PROGRAM
1
2
3
4
5
6
7
8
9

5. ALARMS AND WARNINGS

The open door and open filter alarms lead to the pausing of the current programme. When the
conditions triggering the alarm disappear, the drying cycle can be restarted as soon as the alarm
is closed. The other alarms stop the programme and a warning alarm is heard. This warning is
stopped by pressing SELECT or by removing the reason for the alarm.
The following table lists the alarms and their possible causes.
Alarm Meaning
AL-1 Door open
AL-2 Filter cover open
AL-3 No flame
AL-4 Pressure drop failure
or insufficient air flow
AL-5 Motor - fan overload
AL-6 Over temperature
AL-7 Dirty filter
AL-9 Probe Alarm
If any of the previous alarms were to persist, consult your Technical Assistance Service. Always
use the machine's serial number for your queries.
RECOMMENDED
USE
TOWELS
COTTON 1
COTTON 2
SYNTHETICS
DELICATES
INTENSIVE 1
INTENSIVE 2
EXTRA 1
EXTRA 2
Possible solutions
* Close the door.
* Close the filter cover.
* Check gas supply cock open.
* Check that the pressure is correct. See 3.4 .
* Check that the outlet conduit is free, check that it is not too
long.
* Check that the filter is fluff-free.
* Check that the fan's turbine is fluff-free.
* Check that the outlet conduit is correctly connected, and
does not have a free outlet.
* Check that the air flow is correct.
* Check gas pressure is correct.
Note: the safety thermostat has to be rearmed.
* Clean the filter.
* Clean filter more regularly, do not reach this point.
This alarm is never displayed in self-service models
* Problem with the temperature and/or humidity probes.
Contact your Technical Assistance Service .
DRYING
Min ºC %H.R.
30 80 25
35 75 25
40 65 30
20 60 30
25 45 30
20 75 30
30 75 30
15 90 20
20 90 15
ROTATION
TIME
70
70
70
70
70
70
70
30
30
71