Shadow Blackout Feature; Blackout Feature; Advanced Keys And Buttons; Blade Navigation Buttons - Provo Craft Cricut Manual Del Usuario

Ocultar thumbs

Tabla de contenido

Idiomas disponibles

Sign

Charm

Shadow

Paper

Saver

Shift

TIP: Because the maximum cut height is 5.5 inches, and because the Shadow and Shadow Blackout

Features are proportionately larger than the original character, these Features don't always work when

the Size Dial is set at 5.5 inches. A warning on the LCD screen will appear if you try to cut a character

that will not fit on the paper.

Blackout Feature

The Blackout Feature is the solid version of the

base shape. Images from the Doodlecharms

tridge are shown here.

ADVANCED KEYS AND BUTTONS

Back

Space

Clear

Reset

Display

All

Repeat

Sound

Last

On/Off

Set

Load

Paper

Last

Size

Load

Unload

Paper

Slotted

Silhouette

Shadow

Blackout

Real

Dial Size

Shift

Lock

Base Image

Blade navigation Buttons are the four directional buttons marked with

STOP

arrows and arranged around the cut button. They allow you to move the cutting

head up, down, left, or right so you can easily position the cutting head exactly

where you want to start a cut.

Use the Set Paper Size key when you are using a paper size smaller than 6" x 12" (15.2

cm x 30.5 cm). Place the paper on the Cutting Mat, aligning it in the lower LEFT corner of the

mat as indicated. Once the paper has been placed on the mat, insert the mat arrow first into

the machine, holding it firmly between the roller bar and the deck. Then press load Paper.

Move the cutting blade to the upper RIGHT corner of the paper using the Blade Navigation

Buttons, and then push the Set Paper Size key. The size of your paper will appear on the

LCD screen. You can now begin entering your project information.