FUNCTIONS
Controls panel
NO FROST
Temp.Set
Eco
Eco
o
S.Frz.
S.Frz.
Alarm
Alarm
rm
Child lock
Child lock
Child l
k
Func.Set
OK/ 5S
Start-up
Insert the plug in the socket to switch on the freezer.
Display will show you code dF and it means that the freezer is in defrosting condition. After defrosting ,
display will show you code HH.
The alarm led F and acoustic signal will indicate that the temperature inside freezer is not sufficiently cold
for storage of foodstuffs. Pressing the button A3 to choose the "Alarm" function then press the button A4,
you can disable acoustic signal, but warning light will be on till freezer will reach the temperature of -12°C.
When display show the temperature of -12°C, alarm condition will stop automatically and freezer will be
ready for food storage.
Check the Controls Panel:
Touch any button on the display screen and check whether the temperature area and the selected icon can
be lightened.
Set temperature:
To set temperature, push the button A2. During temperature setting two numbers on display show the
point set in flashing mode. Additional pressing on this button modify the set-point in cycling and decreasing
mode from –14°C to –26°C.
If no action is done on the OK button within 5 sec, the set point will be stored automatically.
After the temperature is set, the two numbers on display come back to the freezer temperature visualization.
Manufacturer setting of temperature is -18°C.
Power function:
Press the button A4 for 5 sec to turn off the power of the freezer; do it again the power will be turned on.
Before any cleaning operation, make sure to disconnect the appliance from the power supply by pulling
out the plug, it isn't enough to turn off the appliance pushing power button.
C
C
A2
D
A2
E
D
G
E
F
G
F
A3
A3
A4
A4
Freezing temperature display icon
Temperature setting button
Eco function icon
Fast freezing icon
Child lock icon
Alarm indicator icon
Function selection button
(eco/ fast freezing/ alarm/child lock)
OK button / Power button
8