Using Front Audio/ Video Input Jacks; Using Audio Output Jacks - Sanyo DS25520 Manual Del Propietário

USING THE FRONT AUDIO/ VIDEO INPUT JACKS
CONNECTING A VIDEO GAME OR OTHER EXTERNAL EQUIPMENT
Switch off TV and video game before connecting cables.
1. Connect game Audio Output (R/L) to the TV Audio Input (R/L). Then connect game
Video Out to the TV Video In
ƒ
2. Press POWER key
3. Press the INPUT key „ to select program source: TV signal or signal from the equipment
connected to the A/V jacks. Press the MENU key … and select Game from the on-screen
menu. The TV screen and sound will automatically change to factory preset settings.
Camcorder
USING THE AUDIO OUTPUT JACKS
CONNECTING A STEREO AMPLIFIER TO AUDIO OUT JACKS
1. Connect the TV Audio Out (R/L)
2. Press POWER to turn on the TV. Turn on external equipment also.
ƒ
Stereo Amplifier
‚
.
.
to turn on the TV Turn on external equipment also.
‚
‚
to the Stereo Amplifier In (R/L)
‚
Remote Control
„
ƒ
Video Game
…
ƒ
.
Back of TV
QuickTips
Position your TV at
I
least 2 feet from stereo
speakers. The magnets
in the speakers may
affect the picture
quality.
Do not connect
I
external speakers
directly to the TV.
Make sure all cable
I
connectors are fully
seated on jacks.
Always match cables
I
according to the
colors; for right
RED
audio, for left
WHITE
audio and for
YELLOW
video.
A solid Blue screen
I
with the words Video1
or Video2 displayed
means that the
Video/Game mode is
selected, but no signal
is being detected at the
Video jack.
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
11