Ipod Docking - Audiovox CE710CR Manual Del Usuario

This model includes adaptors for adopting different iPod
extended period of time, it is recommended to cover the docking port by using the "Dock Cover" insert
(included).
1. Select a suitable adaptor for your iPod
inserted into the docking port by placing the connector on the bottom of the iPod
in the docking bay.
Note: Please be careful when seating the iPod into the docking to avoid damaging the 30-pin
connector on iPod or docking system.
2. Press the POWER On/Off button to switch on the docking system.
3. Press the FUNCTION button repeatedly until the indicator "iPod" shows on the display. The iPod
start playing and charging automatically.
4. Select your desired EQ and play mode in your iPod
5. Press the VOL +/- button on the docking system to adjust your desired volume level.
NOTE:The volume level cannot be adjusted by the volume control of your iPod
docked.
®
6. The iPod is charging even during playback.
NOTE:The recharge function still operates in Radio, iPod and AUX mode.
®
7. To remove the iPod from the unit, press and hold the PLAY/PAUSE button for three seconds to
switch off the device and then gently remove it from the docking connector.
You may control the playback of your iPod
• Press the PLAY/PAUSE
• Press the iPod Skip/Search Forward
• Press and hold the iPod Skip/Search Forward
rewinding during playback.

iPod DOCKING

®
models. If the docking port will not be used for an
®
and insert it into the docking area. Your iPod
®
.
®
by:
button to pause or resume the iPod
or Backward
or Backward
10
®
onto the connector
®
after being
®
playback;
button to skip to the next or previous song;
button for fast-forwarding or fast-
®
can now be
®
will