Switching Off - Trotec BP25 Manual De Instrucciones

Settings
Switching on the laser pointer/display backlight
Press the "Laser" button (5) to switch the laser pointer
and the display backlight on or off.
In the basic position, press the "Laser" button (2)
• 1x to switch on the laser pointer;
• 2x to switch on the display backlight;
• 3x to switch off the laser pointer;
• 4x to switch off the display backlight.
B - 11
Changing the display °C - °F
Press the "°C/°F" button (4) to change between the units
for the measured values.
Enable/disable alarm
Press and hold the "°C/°F" button (4) for approx. three
seconds to switch the alarm tone on or off.

Switching off

1. Press and hold the trigger (1) for approx. three
seconds in SCAN mode.
– The device switches off.
Operating Manual - Dew Point Scanner BP25
EN