Installation Rules - Vimar ELVOX 41020 Manual Del Instalador

41020
Pressing (Cancel) terminates the code entry proce-
dure. This event is also signalled by the extinguishing of
all the LEDs with the exception of the LED of the button
(Cancel) which flashes 3 times.
6. Updating
The device can be updated using SaveProg/FWUpdate.
Disconnect the device from the auxiliary power sup-
ply and/or PoE, connect it to the PC by USB cable and
start the update procedure. While waiting for the update
to start and during the update procedure, only the LED
of the button (Key) remains illuminated. If updating
does not start within 30 seconds of connecting the PC
by USB cable, the device will return to normal operating
mode (standby state, all LEDs on) and it will no longer be
possible to update it. Disconnect and then reconnect the
USB cable to repeat the operation.
When it is part of an Elvox IP video door entry system
(
eipvdes ), the device is updated by via Video Door IP
Manager by the network.
NOTE: the device is able to operate in eipvdes mode and
can be managed and updated using Video Door IP Man-
ager if it is equipped with firmware version 1.3.4.1 or later.
If not, it can be updated using SaveProg/FWUpdate.
The instruction manual is downloadable from the site www.
vimar.com

Installation rules

Installation should be carried out by qualified personnel
in compliance with the current regulations regarding the
installation of electrical equipment in the country where
the products are installed.
Conformity
EMC directive
Standards EN 60065, EN 61000-6-1 and EN 61000-6-3.
REACH (EU) Regulation no. 1907/2006 – Art.33. The
product may contain traces of lead.
Règlement REACH (EU) n° 1907/2006 – art.33. Le
produit pourrait contenir des traces de plomb.
WEEE - Information for users
If the crossed-out bin symbol appears on the
equipment or packaging, this means the product must
not be included with other general waste at the end of
its working life. The user must take the worn product to a sorted
waste center, or return it to the retailer when purchasing a new
one. Products for disposal can be consigned free of charge
(without any new purchase obligation) to retailers with a
sales area of at least 400m
An efficient sorted waste collection for the environmentally
friendly disposal of the used device, or its subsequent
recycling, helps avoid the potential negative effects on the
environment and people's health, and encourages the re-use
and/or recycling of the construction materials.
EN
, if they measure less than 25cm.
2
9