Speed Table; Useful Tips - ECG RSM 02 Manual De Instrucciones

The hooks or the beaters should be inserted in a specifi c position. You can insert a hook or a beater with
gear only in the smaller socket and the second beater or hook with the pinion can be inserted only in
the larger socket.
Notes:
• Make sure that the beaters or hooks are inserted in the correct sockets. Otherwise, the operation of the mixer can
be negatively aff ected.
• You can use only one type of attachments at any one time.
Use as a table mixer
1. Place the base on an even and fi rm surface.
2. Insert correctly the beaters or the dough hooks.
3. Place the mixer in the mixer holder and make sure that the recesses of the mixer are correctly fi tted to the projections
of the holder. Correct placement is indicated by a snap.
4. When releasing the mixer from the holder, hold with one hand the safety lock of the mixer and pull out the mixer
from the holder with the other hand.
5. Place the required ingredients in the bowl. The amount of the ingredients must not exceed the MAX line on the
wall of the bowl.
6. Make sure that the speed button is in the "0" position and plug in the power cord in the outlet.
7. Set the required speed on the speed controller. There are 5 diff erent speeds available. It is recommended when
kneading dough to set a lower speed at fi rst, then increase the speed for optimal results. The maximum speed of
the blender is achieved by pressing the Turbo button.
Warning: Do not put in the bowl knives, metal spoons, forks, etc. during the operation.
If a foreign object falls in the bowl during the mixer operation, for example spatula, switch the speed
selector immediately to "0" position and remove the object!
8. The maximum operating time should not exceed 4 minutes. Allow the appliance to cool for at least 20 minutes
between two cycles.
9. When the mixing or kneading is fi nished, switch the speed to "0" position and unplug the power cord.
10. Press and hold the release button for tilting the stand and raise the holder with the mixer to secure it in the tilted
position.
11. If necessary, wipe the food remains off the beaters or hooks using rubber or wooden spatula.
12. Grasp the beaters or hooks with one hand, with the other hand press the attachments release button and remove
the beaters or the dough hooks from the mixer.
Note: Remove the beaters or the hooks only when the speed selector is set to "0"!
13. You can use the mixer also separately, without placing it in the stand: First, press with one hand the release button
of the mixer and remove the mixer from the stand with the other hand.

Speed table

1 ROLLING
2 BLENDING
3 MIXING
4 PUREE
5 WHIPPING
Turbo TURBO

USEFUL TIPS

• Remove chilled foods, such as butter or eggs earlier from earlier from the refrigerator and allow them to warm up
to room temperature before processing.
This speed is suitable for the initial blending/mixing of larger pieces of food, like for
example butter, fl our or potatoes.
This speed is suitable for the initial blending/mixing of liquid foods. For example salad
dressings or other sauces.
To stir dough for pies, cakes and sponge doughs.
This speed is suitable to whip butter, desert icings and frostings and sauces.
This speed is suitable for beating egg whites or eggs, mashed potatoes and whipped
cream.
Pulse at maximum speed.
GB
21