Installation; Installation Site; There Must Be Ground Drainage; Ventilation And Aeration - BADU BNR 400 Instrucciones Para El Manjeo

Installation

5 Installation
5.1

Installation site

5.1.1 Installation
• The installation site must be clean and dry. Installation
outdoors is not permitted.
• The installation position is flexible, display and switch must
be operable.
5.1.2

There must be ground drainage

 Calculate the size of the ground drain according to the
following criteria:
– Size of the swimming pool.
– Circulation flow rate.
– Flow feed
5.1.3

Ventilation and aeration

 Ensure sufficient ventilation and aeration. The ventilation and
aeration must ensure the following conditions:
– Prevention of condensation.
– Limitation of the ambient temperature to maximum 40 °C.
5.1.4

Reserve space

 Measure reserve space so that the upper part of the
BADU OmniTronic can be removed and the clock can be set
without any trouble. Observe a removal height of 200 mm.
5.1.5

Cable laying/line laying

 Voltage potentials must be separated as shown in the
following drawing.
 Use line/cable laying as shown in the following drawing.
20 EN 01|2020